Top menu

Posts 11 - 15 of 15 First | Prev. | 1 2 | Next | Last | All

Topic: «Group policy settings», Rsop

« Previous topic | Next topic »

Ekaterina Vavilova
Technical Support Engineer
Editor


User profile
Posts: 568
 Joined: 06/27/2007
Aftab Ahmad wrote:
I even tried rsop.msc /32 and still do not get the Devicelock to appear for GP settings applied on a machine.

Do you run Rsop on your machine or the client?

Aftab Ahmad wrote:
Or should I try creating the policies from a 32 bit Windows system?

DeviceLock 7.0./7.1 versions support 64-bit editors.
Aftab Ahmad wrote:
Any reason why some settings are pulled from the GPO while others are not?

Isn't there any other policies with DL configuration which could be inherited?
Posted: 11/22/2011 15:57:45

Top
Aftab Ahmad


User profile
Posts: 9
 Joined: 11/15/2011
 		I ran rsop on the DL Client machine.

Ok, so that means what I am doing is correct in terms of policies.

That is possible but what if I only have ONE DL Policy settings GPO? Should it not get all of the settings from that particular machine?


I will go through and make sure again, I appreciate the help.
Posted: 11/22/2011 18:52:01

Top
Aftab Ahmad


User profile
Posts: 9
 Joined: 11/15/2011
 		Ok, I think I get it, RSOP only works on the machine that you use to configure devicelock GPO settings?

Now I just need to figure out why the settings I set are not getting pulled down by the machine that configures the GPO and by the systems running the service. (I have rebooted a lot and see the GPExtension Policy settings being applied, just do not get the settings I set).
Posted: 11/22/2011 20:37:23

Top
Aftab Ahmad


User profile
Posts: 9
 Joined: 11/15/2011
 		Ok, I think I figured another thing out, the reason some settings were not staying undefined (Devices>Security Settings) is because they have to be configured otherwise they get auto configured.
Posted: 11/23/2011 00:08:08

Top
Ekaterina Vavilova
Technical Support Engineer
Editor


User profile
Posts: 568
 Joined: 06/27/2007
Aftab Ahmad wrote:
Ok, I think I get it, RSOP only works on the machine that you use to configure devicelock GPO settings?

Yes, RSOP can be generated only on the machine with DL consoles installed, since there is no DL GP extension on the client side usually, which is required to obtain DL settings information for RSOP report.
Aftab Ahmad wrote:
the reason some settings were not staying undefined (Devices>Security Settings) is because they have to be configured otherwise they get auto configured.

True. By this reason we recommend to configure all DL settings explicitly for the default meaning may vary from the desired condition.
Posted: 11/30/2011 13:06:27

Top

Posts 11 - 15 of 15 First | Prev. | 1 2 | Next | Last | All

Live Chat